Skip to Content
Inbox

Inboxes

Your sending inboxes: connect Gmail, Microsoft or SMTP, update settings, verify, disconnect and control warmup.

Inbox12 endpointsKen-Version: 2026-11-02AuthenticationWorkspacesErrors
MarkdownOpenAPI

Path parameters

The endpoints whose path names one of these take it as described here. An endpoint's own table lists a path parameter only when it describes it differently.

NameInTypeRequiredDescription
inboxIdpathinteger (int64)requiredThe inbox's id.

Headers

The endpoints on this page take these headers. Each endpoint's curl shows the ones it sends.

NameInTypeRequiredDescription
Ken-Versionheaderstring, one of: 2026-11-02, 1.1optionalThe API version, a date in YYYY-MM-DD form. 1.1 is another name for the first dated version. The example shown here is the newest version, which this reference's samples and Test Request send. Leave it out to use your API key's pinned version. Keys created in the Kenso app are pinned to the newest version; keys minted by the CLI login are not. A key with no pinned version and no header gets the legacy shape where the path has one, and 404 where the path exists only in this version. A date that is not a version answers 400 unsupported_version; any other value that is not a version is treated as legacy.
X-Ken-Workspace-Idheaderinteger (int64)optionalThe id of the workspace to act in. Leave it out when your API key reaches only one workspace. When the key reaches more than one, a request without this header answers 400 workspace_required. A workspace you are not a member of answers 404 not_found.

List inboxes

GET/v1/inboxesinboxes.list
Permission
Delivery view
Rate limit
12,000 requests a minute per API key

Try it on developer.ken.so

Returns the workspace's inboxes, a page at a time with limit and cursor. Filter them with status, role or isPrimary.

Set availableForCampaignId to list only the inboxes that campaign can be assigned: the inboxes Kenso can send campaign email from now. That list ignores status and does not combine with isPrimary or role. Its items carry fewer fields, plus isKenSendable and isIngestReady.

Errors:

  • 400 validation_failed: limit is not from 1 to 200, cursor is invalid, status or role is not a known value, or isPrimary or role comes with availableForCampaignId.
  • 404 not_found: the availableForCampaignId campaign is not in this workspace.

Requires Delivery view.

Parameters

NameInTypeRequiredDescription
statusquerystringoptionalLists only inboxes with this status, such as active or disconnected.
cursorquerystringoptionalThe pagination.nextCursor value from the previous page. Omit it for the first page.
limitqueryinteger (int32)optionalHow many inboxes to return, from 1 to 200. Defaults to 50.
availableForCampaignIdqueryinteger (int64)optionalA campaign id. Lists only the inboxes that campaign can be assigned, and ignores status.
isPrimaryquerybooleanoptionalSet to true to list only primary inboxes (isPrimary: a member's own mailbox on one of the workspace's domains), or false to list only the rest.
rolequerystringoptionalLists only inboxes with this role: sending, replies or retired. Combines with status and isPrimary, not with availableForCampaignId.
Request
curl -X GET "https://api.ken.so/v1/inboxes?limit=50" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID"

Response 200

data is a list of Inbox. Each item has these fields. The response also carries pagination.

Show the 41 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Connect an SMTP inbox

POST/v1/inboxesinboxes.create
Permission
Delivery edit
Rate limit
10 requests a minute per API key

Try it on developer.ken.so

Connects a mailbox over SMTP and IMAP and returns it as an inbox. Use it for any mailbox you do not connect through a Gmail or Microsoft connect session.

Send email and password, plus smtpHost, smtpPort, imapHost and imapPort, or a preset that supplies the hosts and ports. username defaults to email, except with a preset whose provider uses a separate username. Kenso logs in to the mailbox before it creates the inbox, so a failed login creates nothing. When the workspace already has an inbox with this address, Kenso connects that inbox instead of creating a new one. Set ownerMemberId to your own member id to connect your own mailbox instead of a shared campaign inbox.

Errors:

  • 400 validation_failed: a required field is missing, the SMTP or IMAP login failed, the preset is unknown or not available, ownerMemberId is set on a workspace without the accounts feature, or the existing inbox with this address is a Gmail or Microsoft connection or one Kenso set up for you.
  • 403 forbidden: ownerMemberId is not your own member id, or preset is sent on a workspace without the sending_providers feature.
  • 409 conflict: another inbox in Kenso already uses this address.
  • 503 service_unavailable: Kenso could not check the login right now. Try again.

Requires Delivery edit.

Parameters

NameInTypeRequiredDescription
Idempotency-KeyheaderstringoptionalA unique value, such as a UUID, that makes a retry safe. Send the same key when you retry. For 24 hours, a repeat of the same request with the same key gets the first response again, with the Idempotent-Replayed: true header, and Kenso does not run the action twice. The same key with a different request answers 422 idempotency_key_reused. Keys are per workspace and at most 200 characters long. A repeat sent while the first request is still running can get 503 service_unavailable with Retry-After. Retry it with the same key. Kenso does not store a 4xx or 5xx response, so a retry after one runs the action again. Kenso leaves password out of what it compares and keeps no trace of it, so a repeat that changes only that gets the first response: send a new key when you change it.

Request body

application/json, optional.

FieldTypeRequiredDescription
emailstringrequiredThe mailbox's email address. Required.
usernamestringoptionalThe login username. Defaults to email, except with a preset whose provider uses a separate username.
passwordstringrequiredThe login password. Required. Kenso never returns it.
smtpHoststringoptionalThe SMTP server's host name. Required unless you send a preset.
smtpPortinteger (int32)optionalThe SMTP server's port, such as 587. Required unless you send a preset.
imapHoststringoptionalThe IMAP server's host name. Required unless you send a preset.
imapPortinteger (int32)optionalThe IMAP server's port, such as 993. Required unless you send a preset.
smtpStartTlsbooleanoptionalWhether to send over STARTTLS. Defaults to true.
ownerMemberIdinteger (int64)optionalYour own member id, to connect your own mailbox instead of a shared campaign inbox. It must be your member id, and the workspace needs the accounts feature. Omit it for a shared campaign inbox.
presetstringoptionalA mailbox provider preset slug that Kenso gives you. The preset supplies the hosts, ports and TLS, and Kenso ignores smtpHost, smtpPort, imapHost, imapPort and smtpStartTls. Needs the sending_providers feature.
replyToInboxIdinteger (int64)optionalWith a preset that cannot read mail (no IMAP host): the id of the workspace inbox that receives the replies. Required with such a preset, and ignored otherwise.
Request
curl -X POST "https://api.ken.so/v1/inboxes" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID" \
  -H "Content-Type: application/json" \
  -d '{
  "email": "[email protected]",
  "username": "email",
  "password": "string",
  "smtpHost": "string",
  "smtpPort": 1,
  "imapHost": "string",
  "imapPort": 1,
  "smtpStartTls": true,
  "ownerMemberId": 812,
  "preset": "string",
  "replyToInboxId": 812
}'

Response 201

data is a Inbox.

Show the 41 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Get an inbox

GET/v1/inboxes/{inboxId}inboxes.get
Permission
Delivery view
Rate limit
12,000 requests a minute per API key

Try it on developer.ken.so

Returns one inbox. Only this call includes health: today's sends against the inbox's daily cap, its ramp, its warmup readiness and what blocks it now. Kenso includes health only when the workspace has the agent_send feature, and omits it when it could not read it.

Errors:

  • 404 not_found: no inbox with this id in the workspace.

Requires Delivery view.

Request
curl -X GET "https://api.ken.so/v1/inboxes/812" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID"

Response 200

data is a Inbox.

Show the 41 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Update an inbox

PATCH/v1/inboxes/{inboxId}inboxes.update
Permission
Delivery edit
Rate limit
4,800 requests a minute per API key

Try it on developer.ken.so

Changes the fields you send and leaves the others unchanged. Null clears a text field or stops forwarding.

Fields:

  • firstName, lastName, displayName: the sender name. On an inbox Kenso set up for you, Kenso also changes the name at the mailbox provider.
  • signature: the HTML signature.
  • dailySendLimit: the most emails the inbox sends per day, 0 or more. On an inbox bought as an SMTP inbox a new limit is at most what the inbox has earned: 5 a day at the start, 1 more on each day it sends, up to 10.
  • tagIds: the inbox's full list of tag ids. It replaces the current tags, and an empty list removes them all.
  • forwardingDestination: an external email address that receives the inbox's incoming mail, or null to stop forwarding. Only inboxes Kenso set up for you can forward.
  • paused: true pauses outreach from the inbox and sets pausedAt, or keeps it when the inbox is already paused. Campaign steps, triggers and approved one-to-one Accounts email wait instead of sending, and Kenso plans new contacts on the campaign's other inboxes. false resumes the inbox and clears pausedAt, and held sends go out on the next dispatch. Warmup, reply sync and replies a member sends keep running while it is paused, and campaign assignments stay.
  • trackOpens: the owner's open tracking for replies sent from their own mailbox. Only a member's own mailbox has it, and only its owner may change it. Open tracking is unavailable: Kenso adds no open-tracking pixel to email, so true is refused and false is accepted.
  • profileImageUrl: an https URL of the sender photo. Kenso fetches the image once, which uses one unit of the workspace's image-from-URL quota, and saves it after the mailbox provider accepts it. A photo cannot be removed, so null is refused. It needs the inbox_photos feature and an inbox whose profilePhotoSupport is google or microsoft.

The update is not atomic. Kenso writes trackOpens, then the name, signature, limit and tag fields, then forwarding, then paused, then profileImageUrl, so a failure part way leaves the earlier changes applied. Each write is idempotent, so you can safely retry the same request. A body with no fields returns the inbox unchanged.

Errors:

  • 400 validation_failed: a field is unknown or has the wrong type, trackOpens is sent for a shared campaign inbox, forwardingDestination is not an external email address or the inbox cannot forward, the mailbox provider refused the new name, the inbox cannot take a photo, or dailySendLimit would change an SMTP inbox's limit to more than it has earned (or to null). Detail code feature_disabled on profileImageUrl when the workspace does not have the inbox_photos feature, and open_tracking_unavailable on trackOpens for true (opens are not tracked); nothing is saved.
  • 403 forbidden: trackOpens from anyone but the mailbox's owner.
  • 404 not_found: no inbox with this id in the workspace, or a tagIds entry is not a tag in this workspace. Kenso checks tags before it writes anything.
  • 429 quota_exceeded: the workspace used up its image-from-URL quota.
  • 503 service_unavailable: the mailbox provider did not take the photo in time. Try again.

Requires Delivery edit.

Request body

application/json, optional: object.

Request
curl -X PATCH "https://api.ken.so/v1/inboxes/812" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID" \
  -H "Content-Type: application/json" \
  -d '{}'

Response 200

data is a Inbox.

Show the 41 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Start an inbox connect session

POST/v1/inboxes/connect-sessionsinboxes.create-connect-session
Permission
Any workspace member except a Network member
Rate limit
10 requests a minute per API key

Try it on developer.ken.so

Returns a Google or Microsoft sign-in link that connects a mailbox to the workspace. Open authorizationUrl before expiresAt. Kenso stores nothing until the connect finishes.

Send provider and purpose. A campaign connect adds a shared campaign mailbox through the Kenso Mail app. A primary connect adds the caller's own mailbox through the Kenso Workspace app. It needs the accounts feature and a signed-in member, or an API key that belongs to a member. If a Google or Microsoft admin must trust the app first, send them to adminUrl.

The connect finishes in the Kenso dashboard. After consent, the provider sends the browser there, and the member who created the session (for an API key, the key's owner) must be signed in to this workspace. Kenso refuses anyone else and connects nothing, so an API key that belongs to no member cannot finish a connect. A primary grant for a mailbox other than the member's login email waits for a confirmation in the dashboard, which needs Delivery edit. Set returnTo to choose the dashboard page the finished connect opens.

Any member may call it. A member with Delivery edit can connect any mailbox. A member with only the approve_own_sends permission can connect only their own login email as a primary inbox, and only when that address is on one of the workspace's domains.

Errors:

  • 400 validation_failed: provider, purpose or returnTo is missing or invalid.
  • 403 permission_denied: the caller has neither Delivery edit nor approve_own_sends.
  • 403 forbidden: a primary connect from an API key that belongs to no member, or detail code own_inbox_only when a member with only approve_own_sends asks for a campaign connect.
  • 404 not_found: a primary connect on a workspace without the accounts feature.
  • 409 invalid_state: detail code email_domain_mismatch when a member with only approve_own_sends has a login email that is not on the workspace's domains (the message says how to fix it), or detail code calendar_limit_reached for a primary connect when the member already has 3 calendar accounts connected.

Open to any workspace member.

Request body

application/json, optional.

FieldTypeRequiredDescription
providerstringrequiredThe mailbox platform: google or microsoft. Required.
purposestringrequiredWhat the mailbox is for: campaign (a shared campaign mailbox) or primary (your own mailbox, which needs the accounts feature). Required.
returnTostringoptionalThe dashboard path to come back to after the connect, such as /42/delivery?tab=inboxes&view=all. It must be a relative path that starts with one /, with no scheme, host, //, backslash or control characters, and at most 512 characters. Omit it to come back to the default page.
Request
curl -X POST "https://api.ken.so/v1/inboxes/connect-sessions" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID" \
  -H "Content-Type: application/json" \
  -d '{
  "provider": "google",
  "purpose": "string",
  "returnTo": "/42/delivery?tab=inboxes&view=all"
}'

Response 201

data is a InboxConnectSession.

Show the 8 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Verify an inbox connection

POST/v1/inboxes/{inboxId}/verifyinboxes.verify
Permission
Delivery edit
Rate limit
10 requests a minute per API key

Try it on developer.ken.so

Tests Kenso's stored connection to the mailbox and returns the inbox. Use it to confirm a connection works, for example after its connection.status showed error.

Errors:

  • 400 validation_failed: the connection test failed, for example because the sign-in expired. The message says why.
  • 404 not_found: no inbox with this id in the workspace, or the inbox has no Kenso connection.
  • 503 service_unavailable: Kenso could not reach the mailbox provider. Try again.

Requires Delivery edit.

Request
curl -X POST "https://api.ken.so/v1/inboxes/812/verify" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID"

Response 200

data is a Inbox.

Show the 41 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Disconnect an inbox

POST/v1/inboxes/{inboxId}/disconnectinboxes.disconnect
Permission
Delivery edit
Rate limit
4,800 requests a minute per API key

Try it on developer.ken.so

Removes Kenso's connection to the mailbox and returns the inbox with status disconnected. Kenso stops sending through that connection. To connect the mailbox again, use POST /v1/inboxes for an SMTP mailbox or POST /v1/inboxes/connect-sessions for Gmail and Microsoft.

Errors:

  • 404 not_found: no inbox with this id in the workspace, or the inbox has no Kenso connection.
  • 503 service_unavailable: Kenso could not reach the mailbox provider. Try again.

Requires Delivery edit.

Request
curl -X POST "https://api.ken.so/v1/inboxes/812/disconnect" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID"

Response 200

data is a Inbox.

Show the 41 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Update many inboxes

POST/v1/inboxes/bulk-updateinboxes.bulk-update
Permission
Delivery edit
Rate limit
480 requests a minute per API key

Try it on developer.ken.so

Applies the same change to up to 1,000 inboxes. Send ids, the inbox ids, and at least one field.

Fields:

  • firstName, lastName: the sender name. Null clears it.
  • signature: the HTML signature. Null clears it.
  • dailySendLimit: the most emails each inbox sends per day, 0 or more. On an inbox bought as an SMTP inbox a new limit is at most what the inbox has earned: 5 a day at the start, 1 more on each day it sends, up to 10.
  • tagIds: tag ids to add to every inbox. Tags already on an inbox stay.
  • forwardingDestination: an external email address that receives each inbox's incoming mail, or null to stop forwarding. Only inboxes Kenso set up for you can forward.
  • paused: true pauses outreach from every inbox and false resumes it, as on PATCH /v1/inboxes/{inboxId}.
  • profileImageUrl: an https URL of one sender photo for every inbox, as on PATCH /v1/inboxes/{inboxId}. It takes at most 100 ids and no other field.

displayName and trackOpens are only on PATCH /v1/inboxes/{inboxId}. The response has updatedCount, the inboxes that took every change, and failed, one entry with the reason for each inbox that did not. An inbox in failed is never in updatedCount, and an id sent twice counts once.

Errors:

  • 400 validation_failed: ids is empty or has more than 1,000 ids, a field is unknown or has the wrong type, profileImageUrl comes with another field or more than 100 ids, or forwardingDestination is not an external email address, or dailySendLimit would change an SMTP inbox in ids to more than it has earned (or to null), which the message names and which changes no inbox. Detail code feature_disabled on profileImageUrl when the workspace does not have the inbox_photos feature.
  • 404 not_found: an id is not an inbox in this workspace, or a tagIds entry is not a tag in this workspace. Kenso checks tags before it writes anything.
  • 429 quota_exceeded: the workspace used up its image-from-URL quota for profileImageUrl.

Requires Delivery edit.

Request body

application/json, optional: object.

Request
curl -X POST "https://api.ken.so/v1/inboxes/bulk-update" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID" \
  -H "Content-Type: application/json" \
  -d '{}'

Response 200

data is a InboxBulkResult.

Show the 2 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Check whether an inbox can send a 1:1 email

GET/v1/inboxes/{inboxId}/one-to-one-readinessinboxes.get-one-to-one-readiness
Permission
Delivery view
Rate limit
12,000 requests a minute per API key

Try it on developer.ken.so

Says whether an approved 1:1 email that names this inbox goes out now: an account touch, or a workflow send.email step whose fromInbox is this inbox. It applies the checks the send applies, and sends and changes nothing.

senderKind says how the inbox sends: member_mailbox, shared_inbox or sending_identity. When canSend is false, reason says why (receive_only, not_connected, replies_not_read, not_cold_sender, not_primary or paused) and message what fixes it. Such an email waits until the inbox can send.

signatureWarning is brand_domain when a member's mailbox has a saved signature that loads from or links to a Kenso domain the mailbox's own domain does not cover in a way the brand check refuses (an image, a tracking link). A 1:1 email from it still goes, without the signature; signatureMessage says what to remove. Both are omitted otherwise.

Errors:

  • 404 not_found: no inbox with this id in the workspace.

Requires Delivery view.

Request
curl -X GET "https://api.ken.so/v1/inboxes/812/one-to-one-readiness" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID"

Response 200

data is a InboxOneToOneReadiness.

Show the 8 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Rename an inbox

POST/v1/inboxes/{inboxId}/renameinboxes.rename
Permission
Delivery edit
Rate limit
4,800 requests a minute per API key

Try it on developer.ken.so

Changes the inbox's username, the part of its address before the @. The domain stays the same. Only inboxes Kenso set up for you can be renamed.

Send the new username as localPart (jane.doe, not [email protected]). Kenso renames the mailbox at its provider first, then changes the inbox's email. When the inbox has a sending connection, Kenso reconnects it under the new address: reconnected says whether that happened, and warnings lists any follow-up step that did not finish. The rename itself still succeeded. Renaming to the current username returns the inbox unchanged.

Errors:

  • 400 validation_failed on localPart: detail code invalid when the username is missing or invalid, or provider_rejected when the mailbox provider refused it, with the provider's reason in the message.
  • 404 not_found: no inbox with this id in the workspace.
  • 409 invalid_state, detail code rename_not_supported: Kenso did not set up this inbox, so it cannot rename it.
  • 409 conflict, detail code address_in_use: another inbox already has the new address.
  • 503 service_unavailable: the mailbox provider is not available. Try again.

Requires Delivery edit.

Request body

application/json, optional.

FieldTypeRequiredDescription
localPartstringoptionalThe new part before the @, such as jane.doe, not [email protected]. The domain stays the same.
Request
curl -X POST "https://api.ken.so/v1/inboxes/812/rename" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID" \
  -H "Content-Type: application/json" \
  -d '{
  "localPart": "jane.doe"
}'

Response 200

data is a InboxRename.

Show the 3 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Get an inbox's warmup

GET/v1/inboxes/{inboxId}/warmupinboxes.get-warmup
Permission
Delivery view
Rate limit
12,000 requests a minute per API key

Try it on developer.ken.so

Returns the inbox's warmup state and Kenso's readiness verdict. Kenso's send gate keeps cold campaign email off an inbox until its warmup has run long enough: readiness shows where the inbox stands.

status is pending while warmup the workspace bought waits to start, and paused while it is paused. An Azure inbox with no warmup subscription reads failed, because Kenso cannot enroll Azure inboxes in warmup. Kenso omits readiness when it could not read it.

Errors:

  • 404 not_found: no inbox with this id in the workspace.

Requires Delivery view.

Request
curl -X GET "https://api.ken.so/v1/inboxes/812/warmup" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID"

Response 200

data is a InboxWarmup.

Show the 5 response fields and an example

The fields and an example are also on this endpoint's Markdown page.

Pause or resume an inbox's warmup

PATCH/v1/inboxes/{inboxId}/warmupinboxes.update-warmup
Permission
Delivery edit
Rate limit
4,800 requests a minute per API key

Try it on developer.ken.so

Send enabled: false to pause the inbox's warmup or enabled: true to resume it. Neither enrolls a mailbox that has no warmup subscription. The response leaves out readiness: read it with GET /v1/inboxes/{inboxId}/warmup.

Errors:

  • 400 validation_failed on enabled: enabled is missing or not a boolean, or Kenso could not change this inbox's warmup. The message is the reason code, such as not_found (no inbox with this id in the workspace), not_active (pausing warmup that is not running), not_paused (resuming warmup that is not paused) or provider_error.

Requires Delivery edit.

Request body

application/json, optional: object.

Request
curl -X PATCH "https://api.ken.so/v1/inboxes/812/warmup" \
  -H "Authorization: Bearer $KENSO_API_KEY" \
  -H "Ken-Version: 2026-11-02" \
  -H "X-Ken-Workspace-Id: $KENSO_WORKSPACE_ID" \
  -H "Content-Type: application/json" \
  -d '{}'

Response 200

data is a InboxWarmup.

Show the 5 response fields and an example

The fields and an example are also on this endpoint's Markdown page.


On this page